FixMyKite 7mm Standard Einlass-Ventil – Selbstklebend mit 7,5cm Tear-Aid Patch
Vorrätig
FixMyKite 7mm Standard Einlass-Ventil – Selbstklebend mit 7,5cm Tear-Aid Patch
Die selbst klebenden Ventile von Fixmykite.com, laut www.kiteboarding.com die führende Marke in Sachen D.I.Y. Kite Reparatur, haften auf allen Bladdern.
Zum schnellen und einfachen Reparieren eines alten Bladders oder zum anfertigen eines neuen Ersatzbladders mit passendem Ventil.
Einfach in der Anwendung. Der Klebstoff des Tearaid Patches ist extrem haltbar und sorgt für eine dauerhafte Reparatur.
Alles, was für die Installation des neuen Ventils benötigt wird, ist im Lieferumfang enthalten: Alkoholtupfer und detaillierte Anweisungen.
- altes Ventil entfernen & Ventil Ausrichtung beachten
- Klebestelle mit dem beigefügten Alkohol Patch reinigen
- Schutzfolie an einer Seite abzuziehen & beginnen das neue Ventil anzukleben
- langsam, Falten & Blasen frei den Klebepatch des neuen Ventils aufkleben
- die geklebte Patch Fläche komplett aufrubbeln, FERTIG
- Bladder einbauen & aufpumpen
Kitegarage Pro Tip:
Wenn man die Zeit dafür hat, empfehlen wir den Rand des selbstklebenden Patches mit einer dünnen Schicht Kleber auf Silikon Basis zu versiegeln um den Patch Rand zusätzlich gegen Abrasion, Sand & Salzwasser zu schützen.
English
Fixmykite.com Standard 7mm Inflate Valve, on a 7,5cm/3Inch Tear-Aid Type-A Patch.
From the leaders in kite repair technology.Fixmykite.com’s Self-Stick Valves sticks on all bladders on the Market.Simply peel and stick to make a fast and easy repair on an old bladder or attach to a brand new bladder. The specially formulated adhesive is incredibly durable making for a permanent repair. Everything needed for installing the new valve is included in the package: alcohol wipe and detailed instructions.
Easy to use:
- Remove the old valve, and note the alignment of the value
- Clean the bonding surface with the supplied alcohol Patch
- slowly accurately & wrinkle and bubble free stick the selfstick patch on the bladder while while removing the protective film,
- rubb the Patch area on the bladder to activate a strong bonding of the patch on the surface of the bladder, DONE
Install the bladder, Go Back online on your kite!
Kitegarage Pro Tip:
If you have time for it, we recommend an addional sealing of the Tearaid Patch edge with a thin layer of silicone-based adhesive for advanced protection against abrasion, sand & saltwater.
- The 7mm Self-Stick-Valve’s are One way valve’s, that let air enter while pumping but stops air from going out, to deflate simply squeeze the valve base to let air out.
- The 1-way flap can be cut out to create a 2 way valve.
- These valves are the industry standard and are used on 99% of all kites in production.
Fixmykite self–adhesive valves are compatible with all commercially available bladders on the market.
Easy to use:
- Remove the old valve,
- Clean the bonding surface with the supplied alcohol Patch
- slowly accurately & wrinkle-free stick Centimeter Centimeter for the new valve while removing the protective film,
- rubb the Patch area on the bladder to activate a strong bonding of the patch on the surface of the bladder, DONE
- Install the bladder, Go Back online on your kite!
Designed for professional and permanent repair, and for making a new bladder Spare Parts with a new valve. The special adhesive of TearAid-A patch is extremely durable and easily sticks on all bladder material. FixMyKite provides after-market spare part Valves for all the kitebrands on the market. In addition, we offer length adjustment of the bladder if such an customisation is needed or requested.
for all kite brands on the market! the original factory valve made into a Self-Stick replacement valve by FixMyKite.
Do you you have questions about this product? Send Us an email to office@kitegarage.at
| Gewicht | 0,125 kg |
|---|---|
| Typ | 7MM INFLATE, 9MM INFLATE, 11 MM DEFLATE |
Ähnliche Produkte
Ersatzteile | SpareParts | Zubehör
