Es befinden sich keine Produkte im Warenkorb.
Fixmykite.com
North Airport
Schraubkappen Ventil
auf einem 10cm/4Inch Tear-Aid Typ-A Patch.
Die selbst klebenden Ventile von Fixmykite.com, laut www.kiteboarding.com die führende Marke in Sachen D.I.Y. Kite Reparatur, haften auf allen Bladdern.
Zum schnellen und einfachen Reparieren eines alten Bladders oder zum anfertigen eines neuen Ersatzbladders mit passendem Ventil.
Einfach in der Anwendung. Der Klebstoff des Tearaid Patches ist extrem haltbar und sorgt für eine dauerhafte Reparatur.
Alles, was für die Installation des neuen Ventils benötigt wird, ist im Lieferumfang enthalten: Alkoholtupfer und detaillierte Anweisungen.
- altes Ventil entfernen & Ventil Ausrichtung beachten
- Klebestelle mit dem beigefügten Alkohol Patch reinigen
- Schutzfolie an einer Seite abzuziehen & beginnen das neue Ventil anzukleben
- langsam, Falten & Blasen frei den Klebepatch des neuen Ventils aufkleben
- die geklebte Patch Fläche komplett aufrubbeln, FERTIG
- Bladder einbauen & aufpumpen
Kitegarage Pro Tip:
Wenn man die Zeit dafür hat, empfehlen wir den Rand des selbstklebenden Patches mit einer dünnen Schicht Kleber auf Silikon Basis zu versiegeln um den Patch Rand zusätzlich gegen Abrasion, Sand & Salzwasser zu schützen.
English
Fixmykite.com North Airport Screw Cap Valve on a 10cm/4Inch Tear-Aid Type-A Patch.
From the leaders in kite repair technology.Fixmykite.com’s Self-Stick Valves sticks on all bladders on the Market.Simply peel and stick to make a fast and easy repair on an old bladder or attach to a brand new bladder. The specially formulated adhesive is incredibly durable making for a permanent repair. Everything needed for installing the new valve is included in the package: alcohol wipe and detailed instructions.
Easy to use:
- Remove the old valve, and note the alignment of the value
- Clean the bonding surface with the supplied alcohol Patch
- slowly accurately & wrinkle and bubble free stick the selfstick patch on the bladder while while removing the protective film,
- rubb the Patch area on the bladder to activate a strong bonding of the patch on the surface of the bladder, DONE
Install the bladder, Go Back online on your kite!
Kitegarage Pro Tip:
If you have time for it, we recommend an addional sealing of the Tearaid Patch edge with a thin layer of silicone-based adhesive for advanced protection against abrasion, sand & saltwater.
FMK North Airport Screw Valve (4″ base) selected brand self–adhesive valves are compatible with all commercially available bladders on the market.
How to install a fixmykite.com self stick valve?
1. Valve Removal: If replacing valve, carefully peel off old valve. If old valve does peel off, cut around circumference of valve to remove
2. Cleaning: Wipe area where valve will be placed with provided alcohol swab. DRY COMPLETELY WITH A CLEAN PAPER TOWEL.
3. Peel and Stick: Lay bladder out flat. If possible, have a friend lightly hold bladder on table or other smooth even surface. Peel off paper backing, center valve over hole, and place valve on bladder.
4. Press: Press valve from center outward to remove air bubbles and ensure proper adhesion and creases.
*Pro Tip- Use a hair dryer to heat the valve. This makes it easier to remove the valve. After placement of the Fixmykite self stick valve use the hair dryer again to warm the adhesive. Press the valve from the center out massaging and stretching creating positive adhesion. Be careful not to overheat the bladder or new valve.
Fixmykite self-adhesive valves are compatible with all commercially available bladders on the market.
Easy to use:
- Remove the old valve,
- Clean the bonding surface with the supplied alcohol Patch
- slowly accurately & wrinkle-free stick Centimeter Centimeter for the new valve while removing the protective film,
- rubb the Patch area on the bladder to activate a strong bonding of the patch on the surface of the bladder, DONE
- Install the bladder, Go Back online on your kite!
Designed for professional and permanent repair, and for making a new bladder Spare Parts with a new valve. The special adhesive of TearAid-A patch is extremely durable and easily sticks on all bladder material. FixMyKite provides after-market spare part Valves for all the kitebrands on the market.
available for many all kite brands on the market like: Airush, Blade, F-One, Gaastra, Liquid Force, Naish Octopus, Ocean Rodeo, Ozone, Slingshot the selected brand valve made into a Self-Stick replacement valve by FixMyKite. If you have questions about this product, send Us an email to office@kitegarage.eu
| Gewicht | 0,125 kg |
|---|---|
| Marke | Airush /one-pump 45° Valve, Blade / Epic one-pump /Valve, F-One / one-pump 90° Valve, F-One one-pump / Straight Valve, Gaastra One-Pump Valve, Liquid Force one-pump / Straight Valve, Naish Octopus / Valve Male/Female Set, Ocean Rodeo / one-pump-valve, Ozone 90-Degree / one-pump-valve, Ozone / one-pump valve, Ozone Screw-Cap / (works w/MaxFlow too) (4" base), Screw-Cap / valve small /(Cabrinha, Best), Slingshot / one-pump valve/, Airush XL Inflate/Deflate Valve |
Ähnliche Produkte
Nicht vorrätig
Ersatzteile | SpareParts | Zubehör
Fixmykite.com North/Duotone Pump Adapter Ventil mit Silikondichtring
FixMyKite
Ersatzteile | SpareParts | Zubehör
Nicht vorrätig
Nicht vorrätig
Nicht vorrätig
Ersatzteile | SpareParts | Zubehör
Fixmykite.com Ozone, Gaastra Schraubkappen Ventil / Screw-Cap Ersatzteil
Nicht vorrätig
Ersatzteile | SpareParts | Zubehör
Ersatzteile | SpareParts | Zubehör